Aurora and ten towns within 20 miles(630) 528-2808
Aurora Limewash logo lockup Call (630) 528-2808
Brick house with one wall limewashed white and the next still red brick, illustrating limewash for Yorkville, IL homes

The Kendall County seat, ten miles southwest

Aurora Limewash: Brick Limewash & Whitewash in Yorkville, IL

An old town on Courthouse Hill and along Bridge Street, ringed by newer subdivisions.

(630) 528-2808
  • Aurora and ten towns within 20 miles
  • Licensed, insured local contractors
  • Get the price in writing first
  • Historic district rules covered

Aurora Limewash is a referral site that arranges limewash in Yorkville, Illinois, through local contractors. Yorkville sits about 10 miles southwest of Aurora and has about 26,000 people. It is the Kendall County seat, settled in 1833 on what became Courthouse Hill, and the city calls its recent residential growth unprecedented.

Brick house with one wall limewashed white and the next still red brick, illustrating limewash for Yorkville, IL homes

A Yorkville brick exterior typically runs $4,000 to $12,000 to limewash; brush it over failing joints instead of repointing and brick repair runs $20 to $50 a square foot.

$4,000 to $12,000 for a typical brick exterior

A Chicago-suburb applicator publishes $4 to $8 a square foot. Repointing is extra, $8 to $30 per HomeGuide.

Call (630) 528-2808

Yorkville Rules: Ask the City, Then the HOA

No historic-district rule for Yorkville appears in the sources behind this page, so it states none. The safe order is simple. For an older building on Courthouse Hill or along Bridge Street, ask the city before the exterior changes. In the newer subdivisions, the rule that applies is more likely private: a homeowners association covenant on exterior colours. Get that approval in writing before a colour is chosen. HomeGuide notes that permits are not always required for painting and that regulations vary, a reason to ask.

Older Yorkville Brick and the Mortar Under It

On an older Yorkville wall, the mortar matters more than the finish. Limewash is a breathable coat of slaked lime that hardens by carbonation; it does not hold loose joints together. Any recessed or sandy mortar is repointed first, with a mortar no harder than the brick around it, at $8 to $30 a square foot. Efflorescence, the white salt bloom on a wall, points to water moving through the brick, and its source, often a gutter or downspout, is fixed before any finish goes on.

Bridge Street, Route 47, and Bristol Across the River

Yorkville was incorporated on July 8, 1874, on the south bank only. Bristol, across the Fox, joined it on April 16, 1957 to form the United City of Yorkville. The old business district runs along Bridge Street, Route 47, south of the river and below Courthouse Hill, where the historic courthouse now houses the Kendall County Forest Preserve District. The courts moved to a new courthouse on John Street in 1997. Kendall Marketplace sits on the northwest side of a city that now covers more than 20 square miles.

ZIP codes covered: 60560

Local tip for Yorkville: On an older Yorkville wall, scratch a few joints with a key; sandy mortar gets repointed before limewash.

Limewash in Yorkville? Call Now.

Ask for a written price, with repointing listed separately.

Call (630) 528-2808

Repointing Before Limewash in Yorkville

Recessed or sandy joints are raked out and refilled with a mortar no harder than the brick, at $8 to $30 a square foot; see tuckpointing and repointing.

Exterior Brick Limewash in Yorkville

Once the joints are sound, a full brick exterior is dampened and brushed in two coats, typically $4,000 to $12,000 for an average home; see exterior brick limewash.

Brick Fronts in Newer Yorkville

A subdivision house with brick across the front and siding above is a smaller job, $1,600 to $6,400 for 400 to 800 square feet; see brick front limewash.

Commercial Limewash on Bridge Street

A brick building on Bridge Street takes limewash like a house, with a sidewalk to protect and a business open, at $4 to $8 a square foot; see commercial limewash.

Signs a House Is Ready for Limewash in Yorkville

  • Bare brick soaks up a splash
  • Joints are full and hard
  • No paint or sealer on it
  • Brick clashes with new siding
Frequently Asked Questions

Limewash Questions in Yorkville

How much does limewash cost in Yorkville?

Typically $4,000 to $12,000 for a brick exterior, as a Chicago-suburb applicator publishes. Repointing, where needed, is priced separately at $8 to $30 a square foot.

What are the signs Yorkville brick suits limewash?

Bare brick that darkens when splashed, full and hard mortar joints, and no paint or sealer on the face. Brick that beads water needs a different finish.

Is Yorkville the Kendall County seat?

Yes. It became the seat when Kendall County formed in 1841, lost it to Oswego after an 1845 petition, and regained it by county vote in 1859.

Does Yorkville require a limewash permit?

No local rule appears in this page's sources. Ask the city about buildings on Courthouse Hill or Bridge Street, and check any HOA covenant before picking a colour.

Should old mortar be repaired before limewash?

Yes, wherever it is recessed or sandy. Limewash is a finish, not a repair, and the new mortar should be no harder than the brick around it.